Instrument Panel (I/P) Harness Replacement

INSTRUMENT PANEL (I/P) HARNESS REPLACEMENT

REMOVAL PROCEDURE
1. Disable the SIR. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling.
2. Remove the instrument panel (I/P).
3. Disconnect the wiring harness connectors under the I/P.
4. Disconnect the wiring harness connectors under the hood.




5. Pull on the wiring harness (2) in order to release the retainers.
6. Remove the wiring harness (2).

INSTALLATION PROCEDURE




1. Align the wiring harness retainers.
2. Push in on the wiring harness (2) until the harness is secure.
3. Install the I/P.

IMPORTANT: Ensure that the electrical connectors are routed correctly through the instrument panel.

4. Connect the wiring harness connectors under the I/P.
5. Connect the wiring harness connectors under the hood.
6. Enable the SIR. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling.