14. Mainshaft Retainer Nut Removal

Mainshaft Retainer Nut Removal

^ Tools Required
- DT 46434 Mainshaft Socket
- DT 46435 Mainshaft Socket Handle
- DT 46238 Holding Fixture





1. Install DT 46435 (2) through the hole in DT 46434 (1).
2. Install DT 46434 (1) onto the mainshaft splines and DT 46435 (2) into the lock hole in DT 46238 (3).
3. Apply a slight torque on the mainshaft nut (110) in order to secure the tools in place on the mainshaft (603).





4. Notice: Ensure that all the metal particles are collected in order to prevent internal damage to the transaxle or bearings.

Important: Do not damage the threads or the mainshaft.

Using a chisel remove the lock-tab from the mainshaft retainer nut (110).





5. Remove the mainshaft nut (110).
6. Remove the mainshaft washer (109). Do not discard the nut or the washer.
7. Remove DT 46434 and DT 46435.