Seat Cushion Heater Element Replacement - Front

SEAT CUSHION HEATER ELEMENT REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the front seat from the vehicle.
2. Place the seat on a clean work bench.
3. Remove the seat cushion cover and pad.
4. Gently pull on the heater element to remove the element from the seat foam. Be careful not to damage the foam pad.

INSTALLATION PROCEDURE




1. Peel off the self-stick tape from the back of the heater element.
2. Position the heater element over the seat foam pad. Press firmly to engage the adhesive.
3. Route the heating element wiring harness under the seat pad and connect the harness to the heater module. Secure the wire with tie straps.
4. Install the seat cushion cover and pad.
5. Install the front seat to the vehicle.