32. Crankshaft and Bearing Removal

Crankshaft and Bearings Removal





1. Important: The powertrain control module (PCM) has to perform the crankshaft position learn process under the following conditions:

^ Any operation or repair involving the crankshaft, the crankshaft position (CKP) sensor, or the CKP sensor-to-reluctor wheel gap relationship
^ Timing belt removal or replacement
^ PCM replacement
^ Engine assembly replacement
Remove the bearing cap bolts (108, 109).
2. Remove the bearing caps (103) and lower bearings (106).





3. Remove the crankshaft (102), upper bearings (105) and thrust bearings (104).
4. Remove the pins (107).