Body Control Module: Service and Repair

BODY CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the radio bezel.
2. Disconnect the body control module (BCM) electrical harnesses.
3. Remove the BCM from the instrument panel (I/P) retainer:
1. Pry the BCM tabs from the locking tabs on the underside of the restraint.
2. Slide the BCM out of the retainer.

INSTALLATION PROCEDURE




1. Install the BCM.
2. Install the radio bezel.
3. Slide the BCM tabs into the slots in the I/P retainer until the tabs lock into place.
4. Connect the electrical connectors.
5. Program the new or remanufactured BCM. Programming and Relearning