Drum Brake Adjusting Hardware Replacement

Drum Brake Adjusting Hardware Replacement

^ Tools Required
- J 38400 Brake Shoe Spanner and Spring Remover

Removal Procedure

Caution: Refer to Brake Dust Caution in Service Precautions.

1. Remove the brake drum.





2. Remove the adjuster spring (3). Disengage the adjuster spring hook end from the tab on the adjuster actuator (1).





3. Use the J 38400 in order to spread the brake shoes (1) apart.
4. Remove the adjuster.

Installation Procedure





1. Use the J 38400 in order to spread the brake shoes (1) apart.





2. Important: Ensure that the adjuster (2) engages the brake shoes (4 and 5), the park brake actuator (3), and the adjuster actuator (1) properly.

Install the adjuster.





3. Install the adjuster spring (3).
1. Install the straight end of the adjuster spring into the brake shoe.
2. Install the hook end of the adjuster spring to the adjuster actuator (1).
4. Adjust the brake shoes.
5. Install the brake drum.
6. Lower the vehicle.