15. Transaxle Fluid Level Indicator Installation

Transaxle Fluid Level Indicator Installation





1. Install a fluid fill tube O-ring seal (38) onto the transmission fluid fill tube (37).
2. Install the transmission fluid fill tube (37) into the transmission case.

3. Notice: Refer to Fastener Notice in Service Precautions.

Install the M6 x 1.0 x 14 mm transmission fluid fill tube bolt (36).
^ Tighten the bolt to 12 Nm (106 inch lbs.)
4. Install the fluid level indicator (35) into the fluid level indicator tube (37).