Rear Cover Replacement

Rear Cover Replacement
Removal Procedure
1. Remove the left front wheel.





2. Remove the rear cover bolts.
3. Remove the rear cover.
4. Inspect the oil guide for damage and replace as necessary.

Installation Procedure





1. Install sealant Saturn P/N 21019581 to the rear cover.





2. Install the oil guide.

Important: The oil guide only installs in one direction. Ensure the oil guide is completely seated in the gear shafts.


3. Install the rear cover.
^ Tighten the rear cover bolts to 25 Nm (18 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the left front wheel.