C0896 - Power Steering

DTC C0896





Circuit Description
The power steering control module (PSCM) has a discrete battery positive voltage supply circuit. The PSCM monitors the voltage level on this circuit to ensure the electric power steering (EPS) system has adequate voltage levels to perform the system functions.

DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC C0896 Device Voltage Range/Performance

Conditions for Running the DTC
The ignition is ON.Conditions for Setting the DTC
The EPS system battery voltage is 9 - 11 volts.

Action Taken When the DTC Sets
^ DTC C0896 is stored in memory.
^ The instrument panel cluster (IPC) displays the SERVICE VEHICLE SOON warning indicator.
^ Steering assist is reduced.

Conditions for Clearing the DTC
^ A current DTC will clear when EPS system voltage is greater than 11 volts.
^ A history DTC will clear after 100 consecutive ignition cycles with EPS system voltage greater than 11 volts.
^ Using a scan tool

Test Description





The numbers below refer to the step numbers on the diagnostic table.
2. This step tests if the malfunction exists in the vehicles charging system.
3. This step tests if the malfunction is intermittent.