Panel Replacement - Rear Compartment Closeout

Panel Replacement - Rear Compartment Closeout

Removal Procedure





1. Pull upward on the front of the forward panel at the finger-grip area to disengage the Velcro(R) attachments.
2. Remove the front load floor panel.




3. If the vehicle is equipped with slider locks, push the locks on the rear panel inward to disengage the load floor from the vehicle.




4. Lift the load floor out of the vehicle.



Installation Procedure





1. Position the load floor into the vehicle.




2. If the vehicle is equipped with slider locks, push the locks outward to engage the load floor.




3. Position the front load floor panel into the vehicle.
4. Press at the Velcro(R) locations to secure the floor panel.