22. Automatic Transmission Fluid Temperature Sensor Installation

Automatic Transmission Fluid Temperature Sensor Installation





1. Install a new 12 mm x 2.4 mm fluid temperature O-ring seal (23) on the fluid temperature sensor (22).
2. Insert the fluid temperature sensor with harness assembly (22) into the correct transmission case (31) bore hole.
3. Install the fluid temperature sensor assembly (22).

4. Notice: Refer to Fastener Notice in Service Precautions.

Install the fluid temperature sensor assembly M6 x 1.0 x 18 mm bolt (21).
^ Tighten the bolt to 12 Nm (106 inch lbs.).
5. Install the connector on the temperature sensor connector bracket (52).