Trunk / Liftgate Striker: Service and Repair

Liftgate Latch Striker Replacement

Removal Procedure

1. Open the liftgate.




2. Remove screws (1) from liftgate striker (2).
3. Remove liftgate striker and rear stowage compartment bracket (3) from the rear floor.

Installation Procedure




1. Align the rear stowage compartment bracket (3), spacer, and liftgate striker (2) to the holes in body.

Notice: Refer to Fastener Notice.

2. Install the liftgate striker retaining screws (1).

Tighten the screws in sequence to 25 N.m (18 lb ft).

3. Close the liftgate.