Brakes and Traction Control: Specifications

Front Brakes
Rotor Thickness - NEW 32.2 mm (1.27 in)
Rotor Discard Thickness* 30.7 mm (1.21 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rotor Minimum Allowable Thickness After Refinish 31.08 mm (1.22 in)

Rear Brakes
Rotor Thickness - NEW 12.0 mm (0.472 in)
Rotor Discard Thickness* 10.5 mm (0.413 in)
Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rotor Minimum Allowable Thickness After Refinish 10.8 mm (0.425 in)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.