Compressor Clutch Relay: Service and Repair

Compressor Relay Replacement

Tools Required

J 43244 Relay Puller Pliers

Removal Procedure




1. Remove the underhood electrical center cover.
2. Locate the compressor relay.

Important:
* Always note the orientation of the relay.

* Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.

Using the J 43244 position the tool on opposing corners of the compressor relay.

3. Remove the relay from the electrical center.

Installation Procedure




1. Install the compressor relay in the same position as removed.
2. Install the electrical center cover.