Operation CHARM: Car repair manuals for everyone.

Power Sliding Door Switch: Service and Repair



Power Sliding Door (PSD) Open/Close Pillar Switch Replacement

Removal Procedure

1. Turn off the power sliding door (PSD) from the roof console switch bank.




2. Remove the PSD OPEN/CLOSE switch from the center pillar.
3. Disconnect the electrical connector from the PSD OPEN/CLOSE switch.

Installation Procedure




1. Connect the electrical connector to the PSD OPEN/CLOSE switch.
2. Install the PSD OPEN/CLOSE switch to the center pillar.
3. Turn the PSD ON from the roof console switch bank.