Automatic Level Control Sensor Link Ball Stud Replacement (IRS)

Automatic Level Control Sensor Link Ball Stud Replacement (IRS)

Removal Procedure

1. Remove the ELC/TRAILER fuse.
2. Raise and support the vehicle. Refer to Vehicle Lifting.





Important: When removing the link, do NOT bend or break the sensor arm.

3. Remove the automatic level control sensor link (1) from the ball stud.
4. Remove the ball stud (2) from the control arm.

Installation Procedure




1. Install the ball stud (2) to the control arm.

Tighten the ball stud to 12 N.m (106 lb in).

2. Install the automatic level control sensor link (1) to the ball stud.
3. Lower the vehicle.
4. Install the ELC/TRAILER fuse.