Shift Linkage: Service and Repair

Automatic Transmission Range Selector Lever Replacement

Removal Procedure

1. Remove the throttle body air inlet duct.
2. Remove the automatic transaxle range selector lever cable from the cable lever.




3. Remove the automatic transaxle range selector lever nut.
4. Remove the automatic transaxle range selector lever.

Installation Procedure




1. Install the automatic transaxle range selector lever.

Notice: Refer to Fastener Notice.

2. Install the automatic transaxle range selector lever nut.

Tighten the automatic transaxle range selector lever nut to 32 N.m (23 lb ft).

3. Install the automatic transaxle range selector lever cable to the automatic transaxle range selector lever.
4. Install the throttle body air inlet duct.