Rear Quarter Window Weatherstrip Replacement

Rear Quarter Window Weatherstrip Replacement

Removal Procedure

1. Remove the rear quarter window.




2. Pull the rear quarter window weatherstrip (1) from the pinch-weld flange
3. Remove the rear quarter window weatherstrip from the vehicle.
4. Clean all adhesive from the quarter window pinch-weld flange.

Installation Procedure

Important: The rear quarter window weatherstrip service replacement part is a cut-to-fit part. The weatherstrip must be trimmed to fit the window opening and joined together.




1. Install the rear quarter window weatherstrip forward joint to the vehicle.
2. Align the rear quarter window weatherstrip forward joint (2) to 50 mm (1.96 in) from the front lower window opening radius.
3. Roll the rear quarter window weatherstrip from the joint forward around the entire periphery of the window opening flange.
4. Install the rear quarter window. Refer to Quarter Window Replacement (With A20 Power) Quarter Window Replacement (Without A20 Manual).