Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Removal Procedure

1. Lower the powertrain out of the vehicle. Refer to Transmission Replacement (Removal and Replacement).
2. Remove the left mount retaining bolts.

Installation Procedure

1. Install the left transaxle mount to the frame.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the left mount fasteners using the following sequence:

1. Finger tighten the four bolts.
2. Tighten bolt 1 to 27 Nm (20 lb ft).
3. Tighten bolt 2 to 27 Nm (20 lb ft).
4. Tighten bolt 3 to 27 Nm (20 lb ft).
5. Tighten bolt 4 to 27 Nm (20 lb ft).

3. Install the powertrain in the vehicle. Refer to Transmission Replacement (Removal and Replacement).