Range Selector Lever Cable Bracket Replacement

Range Selector Lever Cable Bracket Replacement

Removal Procedure

1. Remove the power inverter module. Refer to Drive Motor Generator Power Inverter Module Removal and Installation ()




2. Disconnect the range select cable (2) from the range select lever.
3. Release the range select cable retaining clip (1) and remove the cable from the range select cable bracket.




4. Remove the bolts (1) securing the range select lever cable bracket.
5. Remove the range select lever cable bracket (2).

Installation Procedure




1. Install the range select lever cable bracket (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the bolts (1) securing the range select lever cable bracket, then tighten the bolts to 25 Nm (18 lb ft).




3. Install the range select cable to the range select cable bracket. Ensure the range select cable retaining clip (1) is secured in the bracket.
4. Connect the range select cable (2) to the range select lever.
5. Adjust the cable. Refer to Range Selector Lever Cable Adjustment (Adjustments).
6. Install the power inverter module. Refer to Drive Motor Generator Power Inverter Module Removal and Installation ()