Power Steering Fluid Reservoir Outlet Hose Replacement

Power Steering Fluid Reservoir Outlet Hose Replacement (LE5)

Removal Procedure

1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
3. Place drain pans under the vehicle as needed.




4. Compress the power steering reservoir outlet hose clamp (1) and disconnect the power steering reservoir outlet hose (2) from the power steering pump.




5. Compress the power steering reservoir outlet hose clamp (1) and disconnect the power steering reservoir outlet hose (2) from the remote power steering fluid reservoir (2).
6. Remove the power steering fluid reservoir outlet hose from the vehicle.

Installation Procedure

1. Position the power steering fluid reservoir outlet hose to the vehicle.




2. Compress the power steering reservoir outlet hose clamp (1) and connect the power steering reservoir outlet hose (2) to the remote power steering fluid reservoir (2).




3. Compress the power steering reservoir outlet hose clamp (1) and connect the power steering reservoir outlet hose (2) to the power steering pump.
4. Clean any excess fluid from the vehicle and remove the drain pans.
5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).
6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (Service and Repair).