132. Engine Coolant Thermostat Housing Installation

Engine Coolant Thermostat Housing Installation (LCS) (3.6L Hybrid)




1. Install a NEW gasket (1) onto the thermostat housing.




2. Install the thermostat housing (3).

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the thermostat housing bolts (1, 2). Ensure to install the short bolt (1) and the long bolts (2) in the proper position and tighten the thermostat housing bolts to 10 Nm (89 lb in).