Primary Timing Chain Guide Replacement - Lower

PRIMARY TIMING CHAIN GUIDE REPLACEMENT - LOWER

Removal Procedure
1. Remove the primary camshaft drive chain tensioner. 19. Primary Camshaft Intermediate Drive Chain Tensioner Removal






2. Remove the primary camshaft drive chain lower guide bolts. 21. Primary Timing Chain Guide Removal - Lower

3. Remove the primary camshaft drive chain lower guide.

Installation Procedure

1. Position the primary camshaft drive chain lower guide to the oil pump. 114. Primary Timing Chain Guide Installation - Lower

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Do not use paints, lubricants, or corrosion inhibitors on fasteners, or fastener joint surfaces, unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems. When using fasteners that are threaded directly into plastic, use extreme care not to strip the mating plastic part(s). Use hand tools only, and do not use any kind of impact or power tools. Fastener should be hand tightened, fully seated, and not stripped.

2. Install the primary camshaft drive chain lower guide bolts.

Tighten
Primary camshaft drive chain lower guide bolts to 23 Nm (17 lb ft).

3. Install the primary camshaft drive chain tensioner. 116. Primary Camshaft Intermediate Drive Chain Tensioner Installation