Drive Motor Generator Control Module Coolant Pump Replacement (Lower)
Drive Motor Generator Control Module Coolant Pump Replacement (Lower)
Special Tools
J 38185 - Hose Clamp Pliers
Removal Procedure
1. Drain the generator control module cooling system. Refer to Generator Control Module Cooling System Draining and Filling (Generator Control Module Cooling System Draining and Filling)
2. Remove the generator control module coolant pump hose - pump to radiator inlet. Refer to Generator Control Module Coolant Pump Hose Replacement - Pump to Radiator Inlet (Generator Control Module Coolant Pump Hose Replacement (Pump to Radiator))
3. Remove the generator control module coolant pump hose. Refer to Generator Control Module Coolant Pump Hose Replacement (Generator Control Module Coolant Pump Hose Replacement)
4. Disconnect the electrical connectors from the drive motor generator control module coolant pumps.
5. Remove the drive motor generator control module coolant pump bolts (1).
6. Remove the drive motor generator control module coolant pump hose assembly (2) from the vehicle.
7. Remove the drive motor generator control module coolant pump hose clamp (1) using J 38185 - Hose Clamp
Pliers.
8. Remove the drive motor generator control module coolant lower pump (2).
Installation Procedure
1. Install the drive motor generator control module coolant lower pump (2).
2. Install the drive motor generator control module coolant pump hose clamp (1) using J 38185 - Hose Clamp Pliers.
3. Install the drive motor generator control module coolant pump hose assembly (2) from the vehicle.
Caution: Refer to Fastener Caution (Fastener Caution).
4. Install the drive motor generator control module coolant pump bolts (1) and tighten to 7.5 Nm (66 lb in).
5. Connect the electrical connectors to the drive motor generator control module coolant pumps.
6. Install the generator control module coolant pump hose. Refer to Generator Control Module Coolant Pump Hose Replacement (Generator Control Module Coolant Pump Hose Replacement)
7. Install the generator control module coolant pump hose - pump to radiator inlet. Refer to Generator Control Module Coolant Pump Hose Replacement - Pump to Radiator Inlet (Generator Control Module Coolant Pump Hose Replacement (Pump to Radiator))
8. Fill the generator control module cooling system. Refer to Generator Control Module Cooling System Draining and Filling (Generator Control Module Cooling System Draining and Filling)