Fuel Pressure Control Module: Service and Repair

Fuel Pump Flow Control Module Replacement

Removal Procedure




1. Open the rear compartment floor stowage compartment cover.
2. Remove the spare tire spacer (1).
3. Remove the rear compartment floor stowage compartment. Refer to Rear Compartment Floor Stowage Compartment Replacement (HP7) (Service and Repair)Rear Compartment Floor Stowage Compartment Replacement (Without HP7) (Service and Repair).




4. Disconnect the body wiring harness electrical connector (1) from the fuel pump flow control module.




5. Remove the fuel pump flow control module bolts (1).
6. Slide the fuel pump flow control module towards the driver side of the vehicle.
7. Remove the fuel pump flow control module (2) from the vehicle.

Installation Procedure




1. Install the fuel pump flow control module (2) to the vehicle.
2. Slide the fuel pump flow control module towards the passenger side of the vehicle.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the fuel pump flow control module bolts (1).

Tighten the bolts to 10 Nm (89 lb in).




4. Connect the body wiring harness electrical connector (1) to the fuel pump flow control module.




5. Install the rear compartment floor stowage compartment. Refer to Rear Compartment Floor Stowage Compartment Replacement (HP7) (Service and Repair)Rear Compartment Floor Stowage Compartment Replacement (Without HP7) (Service and Repair).
6. Install the spare tire spacer (1).
7. Close the rear compartment floor stowage compartment cover.
8. Program the fuel pump flow control module. Refer to Control Module References (Programming and Relearning).