Insulation Package and Bolster Installation

Insulation Package Installation

1. Pull rear floor pan carpeting forward to expose the floor pan.





2. Install the left and right side insulation mats on the rear seat portion of the floor pan (refer to Figure).

3. Pull back on the carpeting and insulation behind the rear seat to expose the cargo floor.

4. Install the left and right side insulation pads on the floor pan behind the rear seat.



Right and Left Rear Seat Back and Bolster Installation





1. Position seat back assemblies onto center pivot pins.

2. Align relief slot in outboard pivot pin with pivot pin bracket. Push pivot pin into bracket and slide seat back inboard.

3. Install outboard pivot pin clip.

4. Engage cargo floor carpet with seat backs.

5. Install rear seat side bolsters.