Circuit 1932/4/93

CIRCUIT 1932/4/93

Function:
This circuit supplies battery voltage to the windshield wiper motor/control module through the ignition switch.

CIRCUIT 1932

Location:
Connects the underhood junction block connector cavity C to ignition switch connector cavity A.

Type:
Red/White 14 gage wire

Battery voltage should be present at all times.

Repairs:
Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the Symptom Chart.

CIRCUIT 4

Location:
Connects the ignition switch connector cavity B to I/P junction block connector cavity C8.

Type:
Brown 14 gage wire

Battery voltage should be present with ignition in ACC and RUN.

Repairs:
Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the Symptom Chart.

CIRCUIT 93

Location:
Connects the I/P junction block connector cavity A7 to wiper module connector cavity E.

Type:
White 16 gage wire

Battery voltage should be present with ignition in ACC and RUN.

Repairs:
Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the Symptom Chart.