Part B - R&I Lid Lock Cylinder Pawl and Retainer Clip

PART B - REMOVE AND REPLACE REAR COMPARTMENT LID LOCK CYLINDER PAWL AND RETAINER (YELLOW CLIP)





1. Locate and remove E-ring retainer clip at rear of lock cylinder.


2. Remove lid lock cylinder pawl with lid lock cylinder rod retainer (yellow clip) attached, and discard.


3. Install new lid lock cylinder rod retainer (yellow clip, P/N 21077507) onto the new lock cylinder pawl (P/N 21097041).


4. Install new lid lock cylinder pawl and lid lock cylinder rod retainer (yellow clip) assembly onto the lock cylinder and retain with the original E-ring retainer clip.