Circuit 153S

LOCATION:
Connects I/P cluster connector cavity M to I/P splice pack connector cavity K.

TYPE:
Black 22 gage wire. (No ABS)

Check the ABS telltale ground circuit for opens or shorts to ground. Turn the ignition to run with the cluster harness connector installed. The lamp should not come on at all. If it does, the ground circuit must be open or the cluster is at fault. Ground the cluster connector cavity M; if the light goes off then cluster is ok.

REPAIRS:
Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the SYMPTOM CHART.