Circuit 1625, 1625A

CIRCUIT 1625A

Location:
Connects I/P cluster connector cavity H to I/P to body in-line connector cavity A.

Type:
Light Green 22 gage wire.

CIRCUIT 1625

Location:
Connects I/P to body in-line connector cavity A to passive restraint control module connector cavity E

Type:
Light Green 22 gage wire.

Check the lap belt telltale ground circuit by testing the resistance of the circuit to the passive restraint control module. With the ignition in off and the driver side lap belt unbuckled, the circuit should be open. Put the ignition in run. The circuit should be grounded 3 seconds and the telltale light should illuminate. If the telltale does not illuminate, the cluster may be at fault.

Repairs:
Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the Symptom Chart.