Operation CHARM: Car repair manuals for everyone.

Drive Belt: Service and Repair


Fig. 36 Belt Tensioner Arm:






Removal
1. Disconnect battery ground cable.
2. Using 14 mm or 9/16 inch wrench, depress tensioner arm, Fig. 36.
3. Remove belt from A/C compressor and idler pulley, then remove belt.






Installation
1. Route belt over all pulleys, except front cover idler or A/C compressor.
2. Using 14 mm or 9/16 inch wrench, depress tensioner arm, Fig. 36.
3. Install belt to idler pulley and A/C compressor.
4. Tighten idler pulley to specifications.