Sunroof - Switch Assembly Removal & Installation Update
BULLETIN NO.: 96-T-54ISSUE DATE: October, 1996
GROUP/SEQ. NO.: Body-17
CORPORATION NO.: 681610
SUBJECT:
New Service Procedure for Removal and Installation of Sunroof Switch Assembly
MODELS AFFECTED:
1991 - 1997 Saturns equipped with factory installed power sunroofs (CF5)
PURPOSE:
The sunroof switch assembly removal and installation procedure in the Saturn service manuals state that the headliner must be removed to gain access to the sunroof switch assembly. This information is incorrect. In the future, for sunroof switch removal and installation, use the procedure included with this bulletin.
PROCEDURE
Sunroof Switch Assembly
Removal
1. Remove map lamp bezel
2. Depress tabs on sunroof switch assembly to remove from overhead console.
3. Disconnect wire connector from sunroof switch assembly and remove sunroof switch assembly.
Installation
1. Connect wire connector to sunroof switch assembly.
2. Position sunroof switch assembly to overhead roof console and push sunroof switch assembly into overhead console.
3. Install map lamp bezel.
CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System using the appropriate Electronic Labor Time Guide and Labor Operation Code N2460 (Switch Replace-Sunroof Control).