Circuit 68, 68A

CIRCUIT 68

Location:
Connects coolant level switch connector cavity A to underhood junction block connector cavity C7.

Type:
Yellow/Black 22 gage wire.

CIRCUIT 68A

Location
Connects underhood junction block connector cavity A7 to I/P cluster connector cavity Z.

Type
Yellow/Black 22 gage wire.

Check the coolant level telltale power circuit for opens. Jumper circuits 68 and 139F at the coolant level switch. Turn the ignition to run and check for voltage at the cluster harness connector. There should be battery voltage. If not, the circuit is open.

Repairs:
Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the SYMPTOM CHART.