Circuit 1626/1626A
Circuit 1626/1626AFunction:
This is the ground circuit for the headlamp door control module. It goes to ground when the headlamp switch is turned to the HEADLAMP ON position.
CIRCUIT 1626
Location:
Connects headlamp door control module connector cavity A to splice connector cavity A.
Type:
Yellow 22 gage wire
Repairs:
Check for OPENS/SHORTS.
Repair as needed.
If this component is good, go to the next item indicated on the SYMPTOM CHART.
CIRCUIT 1626A
Location:
Connects splice connector cavity A to headlamp switch connector cavity B.
Type:
Yellow 22 gage wire
Repairs:
Check for OPENS/SHORTS.
Repair as needed.
If this component is good, go to the next item indicated on the SYMPTOM CHART.