Rear License, Marker Lamps

Circuit 240


Location: Connects underhood junction block connector cavity C2 to headlamp switch connector cavity E.

Type: Orange 22 gage wire


Function: This circuit provides power to the headlamp switch.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9K

Location: Connects headlamp switch connector cavity K to instrument panel junction block connector cavity B7.


Type: Brown 22 gage wire


Function: This circuit provides power to the I/P junction block for the lighting system.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9F


Location: Connects instrument panel junction block connector cavity E2 to left taillamp assembly connector cavity B.


Type: Brown 22 gage wire


Function: This circuit provides power to the left taillamp assembly.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9G

Location: Connects instrument panel junction block connector cavity F2 to right taillamp assembly connector cavity B.


Type: Brown 22 gage wire


Function: This circuit provides power to the right taillamp assembly.


Check for OPENS/SHORTS.


Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 9R


Location: Connects instrument panel junction block connector cavity F1 to decklid inline connector cavity B6.


Type: Brown 22 gage wire


Function: This circuit provides power to the left license lamp.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9H


Location: Connects instrument panel junction block connector cavity E1 to decklid inline connector cavity C.


Type: Brown 22 gage wire


Function: This circuit provides power to the right license lamp.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9W


Location: Connects decklid inline connector cavity A to left license lamp cavity A.


Type: Black 20 gage wire


Function: This circuit provides power to the left license lamp.


Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9X


Location: Connects decklid inline connector cavity C to right license lamp cavity A.


Type: Black 20 gage wire


Function: This circuit provides power to the right license lamp.


Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 9Y


Location: Connects instrument panel junction block connector cavity E1 to left taillamp assembly cavity B.


Type: Brown 22 gage wire


Function: This circuit provides power to the left taillamp assembly.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9Z


Location: Connects instrument panel junction block connector cavity F2 to right taillamp assembly cavity B.


Type: Brown 22 gage wire


Function: This circuit provides power to the right taillamp assembly.


Check for OPENS/SHORTS.


Repair as needed.


If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9


Location: Connects the instrument panel junction block connector cavity F1 to hatch inline connector cavity A.


Type: Brown 22 gage wire


Function: This circuit provides power to the license lamps.


Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.

Circuit 9U


Location: Connects the hatch inline connector cavity A to IDC splice pack circuit 9V.


Type: Black 20 gage wire


Function: This circuit provides power to the license lamps.


Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.


Circuit 9V


Location: Connects IDC splice pack to license lamps connector cavity A.


Type: Black 20 gage wire

Function: This circuit provides power to the license lamps.


Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the "Complaint-Condition" chart.