Window Guide Channel

REMOVAL

1. Remove outer door panel.
2. Remove glass.
3. Remove window weatherstrip from guide.
4. Remove foam filler.
5. Remove attaching fasteners and glass guide.

INSTALLATION

1. Install glass guide loosely.
2. Install window weatherstrip.
3. Install glass.
4. Cycle glass to 3/4 down position.
5. With glass fully seated in rear glass guide, bring front glass guide to front edge of glass with finger pressure and tighten attaching fasteners.

Torque: 6 N.m (53 in-lbs)

6. Install outer door panel.