Without Daytime Running Lamps

HAZARD Fuse
Location: I/P junction block
Type: 10A Minifuse
Feeds: Circuit 1040B
If the following system is operating normally, the fuse is most likely good:
^ Hazard lamps
If the fuse is blown, determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the Complaint-Condition Chart.

L HDLP Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuits 40A and 40B
If one of the following systems is operating normally, the fuse is most likely good:
^ Left high beam
^ Left low beam
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the Complaint-Condition Chart.

R HDLP Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuits 140A and 140B
If one of the following systems is operating normally, the fuse is most likely good.
^ Right high beam
^ Right low beam
If the fuse is blown determine the cause of the blown fuse and repair.
Replace fuse as needed.
If this component is good, go to the next item indicated on the Complaint-Condition Chart.