Air Checking Pressure Ports - Transaxle Case

Transaxle Pressure Ports:

PRESSURE PORTS - AIR CHECK
To air check a clutch, apply compressed air to the corresponding pressure port with a rubber nozzle air gun.

WHEN CHECKING: APPLY PRESSURE TO:
1st Clutch 1st Clutch Apply Pressure Port
2nd Clutch 2nd Clutch Apply Pressure Port
3rd Clutch 3rd Clutch Apply Pressure Port
4th Clutch 4th Clutch Apply Pressure Port

Forward/Reverse Servo Piston
1. Plug off rev pressure from fwd/rev servo to 2nd clutch actuator pressure port.

2. Place rag over 1st, 3rd and 4th oil to servo piston to avoid spray.

3. Apply air pressure to 1st, 3rd and 4th oil to servo piston pressure port.