Window Guide Channel

REMOVAL





1. Remove door glass.
2. Remove window weatherstrip from guide.
3. Remove inner door seal molding.
4. Remove front door secondary weather strip.
5. Remove attaching fasteners and glass guide.

INSTALLATION





1. Install guide loosely.
2. Install weatherstrip.
3. Install door glass.
4. Cycle glass to 3/4 down position.
5. With glass fully seated in rear glass guide, bring rear glass guide to edge of glass with finger pressure and tighten fastener. Rivet channel to structure.

Torque: 6 N.m (53 in-lbs)

6. Check glass operation and adjust if necessary.