| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Complete Assembly Without Transfer of Parts |
| Manual Trans | 7.4 | 0.0 | B | Does Not Include: Transfer Of Any Part Of Engine Or Replacement Of Optional Equipment Or Check And Adjust Toe-In. |
| Auto Trans | 7.8 | 0.0 | B | Does Not Include: Transfer Of Any Part Of Engine Or Replacement Of Optional Equipment Or Check And Adjust Toe-In. |
| Note |
| With AC, Add | 1.1 | 0.8 | B | |
| With ABS, Add | 0.2 | 0.1 | B | |
| Complete Assembly With Transfer of Parts |
| Manual Trans | 10.4 | 7.7 | B | Includes: Transfer All Fuel & Electrical Units. Does Not Include Transfer Of Optional Equipment Or Check And Adjust Toe-In. |
| Auto Trans | 10.8 | 8.0 | B | Includes: Transfer All Fuel & Electrical Units. Does Not Include Transfer Of Optional Equipment Or Check And Adjust Toe-In. |
| Note |
| With AC, Add | 1.1 | 0.8 | B | |
| With ABS, Add | 0.2 | 0.1 | B | |
| Long Block |
| Manual Trans | 13.9 | 0.0 | A | Includes: R&I Engine And Transfer All Necessary Parts. Does Not Include: Check And Adjust Toe-In. |
| Note |
| With AC, Add | 1.1 | 0.0 | A | |
| With ABS, Add | 0.2 | 0.0 | A | |
| With PS, Add | 0.5 | 0.0 | A | |
| To Replace Valve Cover Gasket If Necessary, Add | 0.5 | 0.0 | A | |
| Short Block |
| Manual Trans | 15.9 | 0.0 | A | Includes: R&I Engine And Transfer All Necessary Parts. Does Not Include: Check And Adjust Toe-In. |
| Auto Trans | 16.3 | 0.0 | A | Includes: R&I Engine And Transfer All Necessary Parts. Does Not Include: Check And Adjust Toe-In. |
| Note |
| With AC, Add | 1.1 | 0.0 | A | |
| With ABS, Add | 0.2 | 0.0 | A | |
| With PS, Add | 0.8 | 0.0 | A | |
| To Replace Valve Cover Gasket If Necessary, Add | 0.5 | 0.0 | A | |
| Overhaul/Rebuild |
| Manual Trans | 23.9 | 0.0 | A | Includes: Measure Cylinder Bores, Crankshaft & Pistons For Proper Size & Hone Cylinders. Renew Pistons, Rings, Pins, Main & Rod Bearings, Grind Valves & Tune-Up. Does Not Include: Check And Adjust Toe-In. |
| Auto Trans | 24.3 | 0.0 | A | Includes: Measure Cylinder Bores, Crankshaft & Pistons For Proper Size & Hone Cylinders. Renew Pistons, Rings, Pins, Main & Rod Bearings, Grind Valves & Tune-Up. Does Not Include: Check And Adjust Toe-In. |
| Note |
| With AC, Add | 1.1 | 0.0 | A | |
| With ABS, Add | 0.2 | 0.0 | A | |
| With PS, Add | 0.8 | 0.0 | A | |