Water Deflector

REMOVAL

1. Remove front door trim panel.
2. Remove energy absorbing foam from door structure.

CAUTION: IF ENERGY ABSORBING FOAM IS REMOVED FROM DOOR IT MUST BE REPLACED WITH AN NEW PART. IF OMITTED FROM THE DOOR THE VEHICLE WILL NOT MEET FEDERAL MOTOR VEHICLE SAFETY STANDARDS (FMVSS), SUBJECTING THE RETAILER TO POSSIBLE CIVIL PENALTIES FOR MAKING THE VEHICLE INOPERATIVE TO THE FMVSS, AND INCREASING THE RISK OF INJURY TO THE VEHICLE OCCUPANTS.

INSTALLATION

1. Remove tape backing and install to door structure.
2. Reinstall door trim panel.