P0764

DTC PARAMETERS

DTC P0764 is set when there has been a ground/open or short to voltage fault in a 3rd actuator circuit for a time less than the time required to set DTCs P0761 or P0763, twice per ignition cycle.

TEST DESCRIPTION

This DTC indicates an intermittent condition. Refer to DTCs P0761 and P0763 for circuits that may have intermittent faults. Also refer to Diagnostic aids for these DTCs.

REPAIR VERIFICATION

Monitor DTC menu "Code Status" for "Pass Since Code Clear" and "Pass This Ignition Cycle." When both have passed, repair is verified.

Criteria for pass:

- Engine running.

- Power present at actuators and no active faults exist for this actuator.