Door Lock Cylinder

REMOVAL

1. Remove cap from lock cylinder using a thin-bladed screwdriver to carefully pry cap from cylinder.

IMPORTANT:
When shutter is removed, the shutter springs may fall out.

2. Remove shutter and shutter springs.





3. Insert key into cylinder, turn it a quarter turn clockwise, and remove cylinder from housing.

4. If necessary, remove pawl from slot in housing.

5. To code lock cylinder(s), refer to "Lock Cylinder Coding" in this bulletin.





Door Lock Cylinder

REMOVAL

1. Remove cap from lock cylinder using a thin-bladed screwdriver to carefully pry cap from cylinder.

IMPORTANT:
When shutter is removed, the shutter springs may fall out.

2. Remove shutter and shutter springs.





3. Insert key into cylinder, turn it a quarter turn clockwise, and remove cylinder from housing.

4. If necessary, remove pawl from slot in housing.

5. To code lock cylinder(s), refer to "Lock Cylinder Coding" in this bulletin.





INSTALLATION

1. If removed, insert pawl into slot in housing.

2. With key inserted into cylinder, install cylinder into housing.

3. Remove key by turning it a quarter turn counterclockwise.

4. Install shutter springs and shutter assembly.

5. Install cap onto lock cylinder.