Fuse Circuits Testing

R HDLP Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuit 140A and 140B

If the following system is operating normally, the fuse is most likely good:
^ Right high beam
^ Right low beam

If the fuse is blown, determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good, go to the next item indicated on the chart.

HAZARD Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuit 1040A

If the following system is operating normally, the fuse is most likely good:
^ Hazard lamps

If the fuse is blown, determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good, go to the next item indicated on the chart.

L HDLP Fuse
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuits 40A and 40B

If the following system is operating normally, the fuse is most likely good:
^ Left high beam
^ Left low beam

If the fuse is blown, determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good go to the next item indicated on the chart.