Air Temperature Sensor ( Ambient / Intake ): Service and Repair
REMOVAL
1. Turn ignition Off.
2. Disconnect electrical connector from IAT sensor.
NOTE: The connector must be removed by squeezing the sides. Apply pressure to sides of connector gently with pliers. Do not pull on wires.
3. Remove air inlet temperature sensor using a deep well 13 mm socket.
INSTALLATION
1. Install IAT sensor.
Torque: 5 N.m (44 in-lbs)
2. Connect electrical connector to the air intake temperature sensor. Push in on connector until a click is heard and pull back to confirm a positive engagement.