Owner's Handbook Label Placement

1. Open Owner's Handbook to Page 298. (To confirm that you are viewing a 1st Edition, please see footnote at the bottom of the Handbook Table of Contents at the front of the Owner's Handbook.)

2. Remove backing from label to expose adhesive.





3. Refer to the illustration for label placement, and carefully place the label over the existing text on Page 298. Make sure to align the label with the existing text before placing on page.





4. After label is placed over text on Page 298 of the 1st Edition Owner's Handbook, affix Campaign Completion Label on a clean, dry surface of the radiator core support, in an area clearly visible when the hood is raised. (Refer to "Campaign Completion Label" procedure in this bulletin.)

1. Open your Owner's Handbook to Page 298.

2. Remove backing from label to expose adhesive.





3. Refer to the illustration for label placement, and carefully place the label over the existing text on Page 298. Make sure to align the label with the existing text before placing on page.

4. After label is placed over text on Page 298, go to Step 5.








5. Apply the attached Campaign Completion Label to a clean surface on the upper radiator core support of the vehicle (under the hood), next to the Saturn Power Module Label (refer to graphic).