AM/FM Stereo Radio

AM/FM Stereo Radio Product Overview:

FEATURES AND BENEFITS
^ Electronic Tuning:
Automatically lock in station signals for best possible reception.
^ 6 AM / 12 FM Radio Presets:
Programmable by following two steps:
1. Tune in desired station.
2. Push and hold the desired preset button for approximately 1 second.
^ Seek Tuning:
Provides up and down seek capability for radio bands. An audible tone indicates seek mode tuning.
^ Automatic Loudness Compensation:
Full depth of sound can be heard at low volume levels.
^ Rotary Pop-Out Treble, Base, and Fade Controls:
Pop-out controls allow treble, bass, and fade adjustments, then the controls "push-in" Out of the way.
^ Clock:
The time of day will be displayed when:
1. The ignition is turned off and the radio power is either on or off.
2. The ignition is turned on and the radio power is off.
3. The ignition is turned on, the radio is on, and a tune, seek, or preset function has not been active for 5 seconds.
To set the time of day:
1. Push and hold the Recall knob.
2. Within 5 seconds, push the left side of the Tune/Seek button until the correct hour appears.
3. Push the right side of the Tune/Seek button until the correct minutes appear.
4. Release the Recall knob.

^ Dimming:
All radios feature continuously damnable nighttime incandescent backlighting for the graphics on the pushbuttons and trimplate. The incandescent backlighting voltage is supplied from the vehicle light switch. The internal lamps are returned to battery (-) through the vehicle low side pulse width modulated (PWM) dimmer control circuit.

The LCD display is backlit whenever ignition voltage is applied without regard to the radio power switch state. When the vehicle light switch is turned on, a step-dim will be preformed with continuous variable dimming available using the panel dimmer control.