Circuit Testing - Fuse - Turn/Hazard/Stop Lamps

BRAKE FUSE
Location: Underhood junction block
Type: 15A Minifuse
Feeds: Circuit 540

If the following system is operating, the fuse is most likely good:
^ Brake lamps
^ Center high-mounted stop lamp

If the fuse is blown determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good, go to the next item indicated on the chart.

HAZARD FUSE
Location: Underhood junction block
Type: 10A Minifuse
Feeds: Circuit 1040B

If the following system is operating, the fuse is most likely good:
^ I/P cluster high beam telltale.
^ Hazard lamps.

If the fuse is blown determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good, go to the next item indicated on the chart.

TURN FUSE
Location: Instrument panel junction block
Type: 10A Maxifuse
Feeds: Circuit 139

If the following system is operating, the fuse is most likely good:
^ Hazard lamps
^ Turn signal lamps
^ I/P cluster turn indicators

If the fuse is blown determine the cause of the blown fuse and repair.

Replace fuse as needed.

If this component is good, go to the next item indicated on the chart.