Intermediate Drive Shaft Removal

FRONT INTERMEDIATE DRIVE SHAFT






1. Disconnect negative battery cable from battery.
2. Remove right drive axle (refer to "Drive Axle Removal").
3. Perform the following:
a. loosen intermediate shaft support bracket-to-intake manifold bracket fastener.
b. Remove intermediate drive shaft support bracket-to-engine block fastener.
c. Swing intermediate shaft support bracket-to-intake manifold bracket toward starter motor.
d. Tighten fastener at intake manifold to hold bracket aside.
4. Remove intermediate drive shaft support bracket-to-engine block fasteners.
5. Remove intermediate drive assembly from vehicle.