Rear Compartment and Liftgate Lock Cylinder

REMOVAL

1. Remove E-clip at rear of lock cylinder and remove pawl.

2. Unhook return spring from case and slide spring from cylinder.





3. Remove cap from lock cylinder by inserting thin-bladed screwdriver between cap and case, and carefully prying cap from case.

IMPORTANT:
When shutter is removed, the shutter springs may fall out.

4. Remove shutter.





5. Insert key and rotate a quarter-turn clockwise, and slide cylinder from housing.

6. To code lock cylinder, refer to "Lock Cylinder Coding" in this bulletin.

INSTALLATION

1. With key inserted into cylinder, install cylinder into housing.





2. Install shutter spring and shutter assembly.

3. Install cap to lock cylinder housing.





4. Slide spring on to cylinder and hook to case.

5. Install pawl to lock cylinder and secure with E-clip.